GENERAL OPERATION
Operation - 38
3 Point Hitch (Optional Accessory)
Some light and medium duty implements (non PTO
powered) can be used on the rear of a 3 point hitch
equipped power unit.
1
2
The optional 3 point hitch is equipped with adjustable
lift links (1) to control the individual draw bars. The
stabilizing links (2) can be allowed to swing freely or
can be locked at a desired position.
The 3 point hitch is equipped with three control
handles. The inner handle raises and lowers the draw
bars. The middle handle controls the left rear set of
hydraulic quick couplers. The outer handle controls
the right rear set of hydraulic quick couplers.
12 Volt 4-Pin Auxiliary Sockets (Optional
Accessory)
Certain attachments require 12 volt auxiliary power.
Plug the attachment’s 12 volt power cord into the
12 volt 4-pin socket. The actions of the front 12 volt
socket are controlled by an on/o switch and two mo-
mentary on buttons on the SDLA handle. The actions
of the rear 12 volt socket are controlled by an on/
o switch and a momentary on/o/on switch on the
panel behind the SDLA control levers. The momentary
buttons or switch are used for controlling movement
that is only used for a brief time. The on/o switches
are used to activate equipment or to select dierent
functions.
(Optional Accessory)
The directional signal / hazard asher lights are
mounted on adjustable arms. They can be positioned
with the arms up (1) for standard use or the arms can
be rotated down (2) for use on power units equipped
with dual wheels.
2
3
1
3
To change the light position, remove the lock pin (3),
move the arm to the desired position, and reinstall
the lock pin to secure in place.
The light is mounted to the pivot bracket using a fric-
tion washer that allows the light to pivot forward or
backward when it contacts an object. If the arm gets
knocked out of position, manually move the arm back
into alignment.
https://www.tractormanualpdf.info/
To Next Page
Loading...
