EasyManua.ls Logo

Veratron VIEWLINE A2C59512390 - Mechanical Installation; Before the Assembly

Veratron VIEWLINE A2C59512390
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MECHANICAL INSTALLATION
6 B001686
MECHANICAL INSTALLATION
WARNING
Before beginning, disconnect the negative terminal on the battery, otherwise you risk a short
circuit.
If the vehicle is supplied by auxiliary batteries, you must also disconnect the negative terminals on these
batteries! Short circuits can cause fires, battery explosions and damages to other electronic systems.
Please note that when you disconnect the battery, all volatile electronic memories lose their input values
and must be reprogrammed.
BEFORE THE ASSEMBLY
1.
Before beginning, turn off the ignition and
remove the ignition key. If necessary, remove
the main circuit switch
2. Disconnect the negative terminal on the
battery. Make sure the battery cannot
unintentionally restart.
3. Place the device at least 300 mm away from any
magnetic compass.

Related product manuals