DEVICE SETUP
Using the e355 Frame
22 E355 INSTALLATION GUIDE
4 Insert and tighten the screw at the back to secure e355 terminal.
Figure 15 Securing the e355 Terminal
To install an iPad
mini/iPad 2
Although iPad mini and iPad 2 devices use different Type A frames, the
installation procedures are the same. Follow these steps to install a tablet into the
frame.
To attach the tablet, the top part of the e355 Frame should be removed.
1 Loosen the retaining screw. The retaining screw is captive, which means that it
cannot be fully removed from the slot.
Figure 16 Loosening Screw to Unlock Release Button
2 Slide the release button to disengage the casing from the main unit.
Figure 17 Removing Top Casing
3 Insert the iPad mini into the casing.
To Next Page
Loading...
Need help?
General
