Getting Started Guide - Moneris UX 301 with Direct Connect 13
2.9 Restarting the application
During the start-up process, if you miss the 2 second window to get into the Setup menu, you can restart the
application by following these steps.
1. On the back of the UX 301, press the service button.
2. On the UX 100 keypad, press the CANC key once.
3. On the UX 100 screen, select Run App.
The screen displays the version/please wait screen.
4. Within 2 seconds, press the FUNC key to access the Setup menu.
To Next Page
Loading...
Need help?
General
