VERITAS NetBackup 5240 User Manual

To configure the IP address
1
Open a Secure Shell (SSH) session to log on to the appliance as an
administrator.
2
Navigate to the Main_Menu > Settings > iSCSI menu.
3
Type the command Interface IPAddress Set.
4
Enter the IP address and the iSCSI interface name as parameters. Press Enter.
Example:
iSCSI> Interface IPAddress Set 10.80.156.88 iscsi1
[Info] The IP address has been configured for iscsi1.
Note: The values used in the examples are sample placeholder values.
To configure the Netmask
1
Open a Secure Shell (SSH) session to log on to the appliance as an
administrator.
2
Navigate to the Main_Menu > Settings > iSCSI menu.
3
Type the command Interface Netmask Set.
4
Enter the Netmask value and the iSCSI interface name as parameters. Press
Enter.
Example:
iSCSI> Interface Netmask Set 255.255.255.0 iscsi10
[Info] The Netmask has been configured for iscsi10.
To configure the gateway
1
Open a Secure Shell (SSH) session to log on to the appliance as an
administrator.
2
Navigate to the Main_Menu > Settings > iSCSI menu.
22Configuring iSCSI
Configuring the interface properties

VERITAS NetBackup 5240 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	5 year(s)