VERITAS NetBackup 5240 User Manual

3
Type the command Interface Gateway Set.
4
Enter the gateway value and the iSCSI interface name as parameters. Press
Enter.
Example:
iSCSI> Interface Gateway Set 192.168.4.1
iscsi10
[Info] The gateway has been configured for iscsi10.
To configure the Maximum Transmission Unit (MTU)
1
Open a Secure Shell (SSH) session to log on to the appliance as an
administrator.
2
Navigate to the Main_Menu > Settings > iSCSI menu.
3
Type the command Interface MTU Set.
4
Enter the MTU value and the iSCSI interface name.
The MTU must be a number from 68 to 65535. The new MTU value applies to
the iSCSI interface and also the network interface that it maps to.
Example:
iSCSI> Interface MTU Set 3000 iscsi10
The new MTU value applies to both iscsi1 and
also network interface eth6.
Do you want to continue?(yes/no)[no]:yes
[Info] The MTU has been configured for iscsi10.
To configure the VLAN tag
1
Open a Secure Shell (SSH) session to log on to the appliance as an
administrator.
2
Navigate to the Main_Menu > Settings > iSCSI menu.
23Configuring iSCSI
Configuring the interface properties

VERITAS NetBackup 5240 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	5 year(s)