Verizon CE1000A - Page 10

GETTING TO KNOW YOUR
VERIZON WIFI EXTENDER
• WPS ButtonWPS Button - allows quick access to the Wi-Fi Protected Setup
(WPS) feature and pairing mode. This is an easy way to add your
Extender to your Wi-Fi network.
• Ethernet LANEthernet LAN - connects devices to your Verizon Wi-Fi Extender
using Ethernet cables to join the local area network (LAN).
The two Ethernet LAN ports are 10/100/1000/2500 Mbps
auto-sensing and can be used with either straight-through or
crossover Ethernet cables.
• Coax LANCoax LAN - connects your Verizon Wi-Fi Extender to the LAN
and/or to other MoCA devices using a coaxial cable.
• Reset ButtonReset Button - allows you to reset your Verizon Wi-Fi Extender
to the factory default settings. To perform a soft reboot, press
and hold the button for at least three seconds. To reset your
Verizon Wi-Fi Extender to the factory default settings, press and
hold the button for at least ten seconds.
• PowerPower - connects your Verizon Wi-Fi Extender to an electrical
wall outlet using the supplied power adapter.
Warning: The included power adapter is for home use only,
supporting voltages from 105-125 voltage in AC. Do not use in
environments with greater than 125 voltage in AC.
1.3c/ REAR LIGHTED INDICATORS
LAN Ethernet
• Unlit – Indicates no Ethernet link or dims after 5minutes idle