125
/ CONFIGURING
ADVANCED SETTINGS
verizon.com/business/products/fios-internet | ©2020 Verizon. All Rights Reserved
2. Specify the Stateful (DHCPv6)Stateful (DHCPv6) settings to be used to assign
LAN IPv6 addresses by entering the following details:
• IPv6 LAN ConfigurationIPv6 LAN Configuration (select Stateful from the
dropdown list)
• LAN Prefix LAN Prefix (automatically populated)
• IPv6 LAN Address IPv6 LAN Address (automatically populated)
• DHCPv6 Client Address RangeDHCPv6 Client Address Range (start and end)
• LAN Link Local AddressLAN Link Local Address (automatically populated)
• Subnet IDSubnet ID - set the site topology for your internal site
• Router Advertisement LifetimeRouter Advertisement Lifetime (minutes between 0-150)
• IPv6 Address LifetimeIPv6 Address Lifetime (minutes between 3-150)
• Option: Allow ICMPv6 Echo Request for LAN devices Option: Allow ICMPv6 Echo Request for LAN devices
using their Global IPv6 Address from WAN sideusing their Global IPv6 Address from WAN side -
requesting an IPv6 address from any available DHCPv6
servers available on the ISP
3. After entering all appropriate IPv6 settings, click ApplyApply to
have changes take eect.
To Next Page
Loading...
