Verizon FiOS - Page 127

127
 / CONFIGURING
ADVANCED SETTINGS
verizon.com/business/products/fios-internet | ©2020 Verizon. All Rights Reserved
• Option: Allow ICMPv6 Echo Request for LAN devices Option: Allow ICMPv6 Echo Request for LAN devices
using their Global IPv6 Address from WAN sideusing their Global IPv6 Address from WAN side -
requesting an IPv6 address from any available DHCPv6
servers available on the ISP
3. After entering all appropriate IPv6 settings, click ApplyApply to
have changes take eect.
DHCPv6 PD - WAN IPv6 Address Connection
The IPv6 WAN DHCPv6 configurations are IPv6 settings that you
enter that will allow your IPv6 connection to be updated by the ISP
as needed.
1. To configure IPv6 WAN Stateful (DHCPv6) mode, select the
DHCPv6-PDDHCPv6-PD option on the IPv6 Configuration ControlIPv6 Configuration Control page
as shown below: