Verizon FiOS - Page 66

66
 / USING NETWORK
CONNECTIONS
verizon.com/business/products/fios-internet | ©2020 Verizon. All Rights Reserved
2. If Windows Internet Naming Service (WINS) is being used,
enter the WINS ServerWINS Server address.
3. In the Lease Time in MinutesLease Time in Minutes field, enter the amount of time a
network device is allowed to connect to the Fios Router with
its currently issued dynamic IP address.
4. Click ApplyApply to save changes.
IP ADDRESS DISTRIBUTION ACCORDING TO DHCP OPTION
 VENDOR CLASS IDENTIFIER
DHCP vendor class is related to DHCP option 60 configuration
within the router. Adding option 60 configurations allows for
particular vendor to get lease from a specified pool of address.
ROUTING TABLE
You can configure your Fios Router to use static or dynamic routing.
• Static routingStatic routing – specifies a fixed routing path to neighboring
destinations based on predetermined metrics.
• Dynamic routingDynamic routing – automatically adjusts how packets travel on
the network. The path determination is based on network/device
reachability and status of network being traveled.
To configure routing:
1. In the Routing TableRouting Table section, click Add new routeAdd new route button to
display and modify the new route configuration page.