WIFI ACCESS POINT CONNECTION
2. Verify the following information:
• StatusStatus - displays the connection status of the network.
• NetworkNetwork – displays the type of network connection.
• Connection TypeConnection Type - displays the type of connection
interface.
• Physical AddressPhysical Address - displays the physical address of the
network card used for the network.
• MTUMTU - specifies the largest packet size permitted for
internet transmissions:
– AutomaticAutomatic: set the MTU (Maximum Transmission
Unit) at 1500.
– Automatic by DHCPAutomatic by DHCP: sets the MTU according to the
DHCP connection.
– ManualManual: allows you to manually set the MTU.
3. Click ApplyApply to save changes.
To Next Page
Loading...
