BROADBAND CONNECTION
(ETHERNET/COAX)
– Obtain an IPv4 Address AutomaticallyObtain an IPv4 Address Automatically: the network
connection is required by Verizon to obtain an IP
address automatically. The server assigning the IP
address also assigns a subnet mask address, which
can be overridden by entering another subnet mask
address.
– Use the Following IP AddressUse the Following IP Address: the network
connection uses a permanent or static IP addressIP address
and Subnet MaskSubnet Mask address, provided by Verizon or
experienced network technician.
• To override the subnet mask, select the Override Subnet Override Subnet
MaskMask check box, then enter the new subnet mask.
• Click ReleaseRelease/RenewRenew in the DHCP LeaseDHCP Lease field to drop/
get an IP address from the DHCP server.
• In the Expires In Expires In field, enter the amount of time a network
device is allowed to connect to the Fios Router with its
currently issued dynamic IP address.
• IPv4 DNS - IPv4 DNS - selects Obtain IPv4 DNS Address Obtain IPv4 DNS Address
DynamicallyDynamically for using Dynamic DNS. Each time the public
IP address changes, the DNS database is automatically
updated with the new IPv4 address. In this way, even
though the IP address changes often, the domain name
remains constant and accessible.
• Internet Connection Firewall - Internet Connection Firewall - allows you to enable or
disable the firewall configuration on this interface.
3. Click ApplyApply to save changes.
To Next Page
Loading...
