Vertex Standard Pilot III User Manual

VXA-300 PILOT III OPERATING MANUAL
26
 If you select the “Count Down” timer, rotate the DIAL
knob to set the values for the timer (1 minutes - 60
minutes).
 The Timer is designed to start/stop/reset repeatedly
whenever you press the VOLUME knob.
 In the “Count Down” timer mode, an alert will sound
and the timer will stop when the “Count Down” timer
reaches “00 00 00.”
 To disable the Timer Mode, press
[
F
]

[
8
(
TIMER
)]
again.
ADVANCED OPERATION
Timer Operation
The VXA-300 is provided a “Stop Watch” timer and a
“Count Down” timer. These can be used for a variety of
time-keeping purposes.
 Press the
[
F
]
key mo-
mentarily, then press the
[
8
(
TIMER
)]
key to ac-
tivate the Timer Mode.
 Press the
[ ( )]
key
toggle the Timer be-
tween the “Stop Watch”
and “Count Down”
timer modes.

“Count Down” timer mode“Stop Watch” mode

Vertex Standard Pilot III Specifications

General

Brand	Vertex Standard
Model	Pilot III
Category	Transceiver
Language	English