INTRODUCTION
This publication is provided as a guide for the trained technician for installing, calibrating,
and servicing the 2158, 2160, and 2162 VERTEX
®
. Repair or adjustment by unauthorized
persons voids the METTLER TOLEDO
®
warranty.
Information regarding your nearest METTLER TOLEDO Distributor, Sales, and Service
location, please contact:
METTLER TOLEDO
6600 Huntley Road
Columbus, Ohio 43229-1012
ph: (614) 841-7300
Information regarding METTLER TOLEDO Technical Training may be obtained by writing,
calling, or faxing to:
METTLER TOLEDO
1150 Dearborn Drive
Worthington, Ohio 43085-6712
ph: (614) 438-4400
fax: (614) 438-4444
WARNING!
This equipment generates, uses, and can radiate radio frequency energy and if not installed and
used properly, i.e., in accordance with the instructions manual, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a Class A
computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference when operated in a commercial environment.
Operation of this equipment in a residential area is likely to cause interference which case the
user at his own expense will be required to take whatever measures may be required to correct
the interference.
METTLER TOLEDO RESERVES THE RIGHT TO MAKE REFINEMENTS OR
CHANGES WITHOUT NOTICE.
To Next Page
Loading...
