Using Directory 2-4
Chapter 2: BASIC CALL HANDLING
MBX IP Station User Guide
To deactivate Temporary COS:
1. Press TRANS/PGM,
2. Dial 32 (User Program code),
3. Dial your Authorization code,
4. Press HOLD/SAVE.
Temporarily override dialing restrictions at a phone
Override the dialing restrictions at any phone by activating Walking COS. The Walking COS
dialing restriction levels are applied for a single call only. For multiple calls, you will need to
reactivate Walking COS or use the FLASH button to regain CO/IP dial-tone.
To activate Walking COS:
1. Press TRANS/PGM,
2. Dial 33 (User Program code),
3. Dial your Authorization Code (station number and password),
4. Dial '*',
5. Place call as normal.
Using Directory
Using Last Number Redial (LNR)
The last number dialed on an external call is automatically saved in the Last Number Redial
(LNR) buffer. On the MBX IP Display Phone, the system will store the numbers dialed on the
last 100 calls.
To dial the Last Number for an external call:
1. Lift the handset,
2. Press Speed Soft button,
3. Dial *,
For UNI/STS/Triad/infinite phones: press SPEED + *.
OR
press the LOG Soft button,
4. Press the Navigation up and down buttons to select from the last 100 numbers dialed
or received,
5. Press the Send Soft button or HOLD/SAVE.
To Next Page
Loading...
