Push-To-Talk (PTT) Page 5-8
Chapter 5: MISC FEATURES
MBX IP Station User Guide
To make a page:
1. Lift the handset,
2. Dial the desired Page zone,
3. If assigned, after page warning tone, make announcement.
To answer a Meet-me-Page:
1. Lift the handset.
2. Dial 546 (Meet-Me-Page code).
Push-To-Talk (PTT) Page
MBX IP Phones can be assigned as a member of one or more of the system's nine
Push-To-Talk (PTT) page groups. Users separately log-in or log-out of any one or all PTT
groups to which the phone is assigned. Once logged in, place or receive one-way page
announcements to/from other users who are logged in to the same PTT group.
To log-in to a PTT group:
1. Dial 538,
2. Dial the desired PTT group number (1-9 or 0 for all groups),
To log-out of the PTT group(s):
1. Dial 538, the PTT Log-in/out code,
2. Press the * key.
To place a page announcement to the active PTT group:
1. Press and hold the PTT Flex button,
2. After confirmation tone, make page announcement.
Power Fail Transfer (PFT)
When AC power to the system fails, back-up operation may be provided with back-up batteries
or Power Fail Transfer (PFT). When battery back-up is provided the station will operate
normally. When PFT is implemented, an SLT is connected to a CO line by the system. This
SLT can be used as any normal SLT, providing service while power is out.
To Next Page
Loading...
