Network Configuration B-2
Appendix B: IP PHONES
MBX IP Station User Guide
Network Configuration
The User can review the current network configuration or modify a new phone network
configuration.
To access Network Config. settings:
1. Press [MENU] button and 2 (Network Config),
2. Enter the password (default=147*); the following will display:
3. Press the # key to toggle between multiple profiles (MFIM),
4. Press the [VOL Up/Down] buttons to advance to the next network configuration item,
5. Press the [HOLD/SAVE] button to save each setting.
To set default Config. settings:
1. In Network Config. Menu, use [VOL Up/Down] buttons to locate the Default Config.
Screen (shown), "SET DEFAULT CONFIG(DOT:*)",
2. Press the * key.
To exit Config. settings:
1. Press the [SPEAKER] button,
2. Press the * key to exit,
OR
3. Press the # key to Reset/Reboot the phone with the new setting.
MFIM #[1/2] ?
MFIM #1 - CHANGE[#]
To Next Page
Loading...
