Using Directory 2-5
Chapter 2: BASIC CALL HANDLING
MBX IP Station User Guide
Using and Entering Saved Number Dial
You may store the last number dialed on an external call to the Saved Number Dial buffer for
convenient dialing at a later time. The Saved number is stored until a new number is saved.
To place a call using Save Number Dial:
1. Lift the handset, and/or press the DIR Soft button,
2. Dial 1 for Station Speed,
3. Dial #.
To store a number in the Save Number Dial:
While on an outgoing external call, press the HOLD/SAVE button.
Using System Speed Dial Numbers
The MBX IP-100 system has memory allocated for 800 System Speed Dial numbers (bins
200-999). The MBX IP-300 systems each have memory allocated for 3000 System Speed Dial
numbers (bins 2000-3999).
You may, if allowed, use System Speed Dial to call frequently dialed numbers.
In some cases, these numbers are divided into groups called System Speed Zone Groups. In
this case, you may access some numbers and not others and your dialing restrictions may be
invoked.
Only an Attendant can assign System Speed Dial numbers.
To place a call using System Speed Dial:
1. Lift the handset,
2. Press the DIR Soft button,
3. Dial 2 for System Speed,
4. Dial the desired System Speed Dial bin number (200-999 for MBX IP-100, 2000-3999
for MBX IP-300.
To Next Page
Loading...
