Outcall Notification of Voice Mail Messages 3-4
Chapter 3: SEND & RETRIEVE MESSAGES
MBX IP Station User Guide
To set a value for outcall notification attempts:
1. Press the [TRANS] + 7 4 or dial the {Outcall Attempts} feature code.
2. Dial one-digit number of attempts (1-9).
3. Press [SAVE] button.
4. Return to idle after hearing service set tone.
To set a value for outcall notification interval for a retrial case:
1. Press the [TRANS] + 7 5 or dial the {Outcall Interval} feature code.
2. Dial two-digit minute information (01-60).
3. Press the [SAVE] button.
4. Return to idle after hearing service set tone.
To set a phone number for outcall notification:
1. Press the [TRANS] + 7 6 or dial the {Outcall Phone Number} feature code.
2. Dial the phone number including CO access code (Max 24).
3. Press the [SAVE] button.
4. Return to idle after hearing service set tone.
SLT
To enable/disable outcall notification:
1. Dial the {Outcall Notification} feature code.
2. Dial 1 to enable or 0 to disable.
3. Press the hook-switch to save.
4. Replace the handset, return to idle.
To set a value for outcall notification attempts:
1. Dial the {Outcall Attempts} feature code.
2. Dial one-digit number of attempts (1-9).
3. Press the hook-switch to save.
4. Replace the handset, return to idle.
To set a value for outcall notification interval for a retrial case:
1. Dial the {Outcall Interval} feature code.
2. Dial two-digit minute information (01-60).
3. Press thehook-switch to save.
4. Replace the handset, return to idle.
To Next Page
Loading...
