Mobile Phone Extension 4-2
Chapter 4: REMOTE SYSTEM ACCESS
MBX IP Station User Guide
To place a call from the mobile extension using the MBX IP System:
1. Dial the ISDN DID number of the station; the system will check the Caller ID and
answer the call. The user then will receive intercom dial tone,
2. Place internal or external MBX IP call as normal.
To Transfer a call from the mobile extension using the MBX IP:
1. Dial the mobile flash digit "*" while on an MBX IP call,
2. Dial the desired extension, the call is transferred and the mobile phone returns to idle.
NOTE: The mobile extension may reconnect to the transfer call by pressing the mobile flash digit (*).
To Next Page
Loading...
