VertiDrive M7 User Manual

12
M7 – 11.607
User manual
www.vertidrive.nl
LIABILITY
VertiDrive B.V. accepts no liability for unsafe situations, accidents and/or damage resulting from any of the following
points:
 Poor maintenance.
 The robot is explicitly NOT suitable for carrying people and or objects.
 It is NOT permitted to modify the robot without prior consultation and prior written permission from
VertiDrive.
 Metal thickness of the surface to wash/clean needs to be at least 8 mm. Lower values will decrease the
holding force of the permanent magnets and increase the risk getting detached from the surface.
 For optimal adhesion the distance between wheels and metal should be no more than 3mm.
 Please note the magnets are temperature sensitive and will lose holding power when exposed to
temperatures over 80° Celsius.
 Avoid driving on curved surfaces, the robot is designed for flat and or small radius curved surfaces only.
The robot can handle certain curved surfaces as instructed by authorized VertiDrive personnel. Practical
instruction how to avoid curved surfaces is explained during training.
Driving on surface with radius

VertiDrive M7 Specifications

General

Brand	VertiDrive
Model	M7
Category	Robotics
Language	English