15
M7 – 11.607
User manual
www.vertidrive.nl
GENERAL SAFETY INSTRUCTIONS
The M7 Robot complies with the fundamental safety and health requirements laid down in the relevant European
Community guidelines. However, careless or inexpert use may lead to dangerous situations.
Always follow the safety rules written by local law and/or defined by the company you are working for. Local safety
rules must always be followed in the first place. Please inform your supervisor in case these contradict to warnings
given in this user manual.
When an application is installed on the robot the operator should be certified and/or trained to use this additional
equipment.
Observe the following general safety instructions:
Job functions, tasks, certification and team line-up (for UHP tools)
Operator
Trained, educated and certified according to local requirements
• Operates the robot from outside the jetting area
• Operates the emergency shut-off on the robot
Pump engineer
Trained, educated and certified according to local requirements
• Monitors the proper operation of the pumping unit and supply of high-pressure water
• Operates the emergency shut-off on the high-pressure system
• Monitors the jetting area and is in visual and/or audio contact with the operator
To Next Page
Loading...