8
M7 – 11.607
User manual
www.vertidrive.nl
Working pressures from 25 up to 250 bar.
Working pressures above 250 bar.
hose/sleeve
A protection that is fitted over the HP hose in order to protect it
against damage from the outside (e.g. by being dragged along
The term ‘unpressurised’ in this manual means that the residual
or control pressure in the system as far as the high-pressure
jetting equipment is less than 25 bar.
A device consisting of a cable with loops that is installed at the
coupling of a HP hose. This ensures that the HP hose cannot
whip around randomly if the coupling comes loose.
To Next Page
Loading...
Need help?
General