Liebert EXL S1 Options
User Manual 10H52226UM60 - Rev. 1 - 01/2017
100
8.10. Standard Parallel kit (Liebert EXL S1)
This cable is used for connecting two o more UPS in parallel configuration.
8.11. MSS
This option is available for unit with MSS installed. The synch distribution from MSS to UPS is
managed by a switch on the top of UPS, see below figure.
For the connection of the cables of the synch distribution, refer to the MSS manual.
Warning
This switch has to be operated by authorized Vertiv service technicians, only.
To Next Page
Loading...
