Technical data Liebert EXL S1
109
User Manual 10H52226UM60 - Rev. 1 - 01/2017
3) The modules cabinet is 2100mm wide and the switches cabinet is 750mm wide. The sum of these two
widths is greater than the width of the fully assembled unit, which is indicated in the table. This difference
is due to the protrusion of some connecting bars and closures from the modules cabinet, which need to be
assembled to the switches cabinet during the installation in field.
4) The modules cabinet weighs 2000kg and the switches cabinet weighs 400kg.
5) The modules cabinet weighs 1815kg and the switches cabinet weighs 340kg.
6) In case of 4 wires split input configuration, the primary input and the Bypass input must have a common
neutral reference
7) Referred to derated load conditions
8) With input voltage at nominal value and voltage distortion THD
V
≤1%
9) Value obtained at 25°C ambient starting from a specified load condition
10) For additional information, contact the technical support
11) Maximum allowable value of prospective short-circuit current at the input terminals of the UPS
Notice
Read and heed the information provided on device labels.
To Next Page
Loading...
