EasyManua.ls Logo

Vertiv Liebert MCM080 - 3 Inspection and Installation

Vertiv Liebert MCM080
127 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 INSPECTION AND INSTALLATION
Safety Information
WARNING! Risk of improper handling. Can cause equipment damage, injury or death.
Read all of the following instructions before attempting to move, lift, remove packaging from or
preparing unit for installation.
WARNING! Risk of heavy condenser falling or tipping over. Can cause property damage,
serious injury or death.
Confirm that all components of the lifting system are rated for the weight of the condenser by
an OSHA Certified rating organization before attempting to lift and/or move the condenser. See
2.2 on page15 throughCondenser and option net weights—Large condensers on page17 for
the condenser weights.
CAUTION: Risk of contact with sharp edges, splinters and exposed fasteners. Can cause
personal injury.
Only properly trained and qualified personnel wearing appropriate safety headgear, gloves,
shoes and glasses should attempt to move, lift, remove packaging from or prepare unit for
installation.
NOTICE
Risk of interference with building doorways, openings and passages. Can cause unit and/or building
damage.
Refer to the installation plans and measure the unit and building opening before moving the unit to verify
clearances.
NOTICE
Risk of improper forklift handling. Can cause unit damage.
Keep the forklift tines level and at a height that will fit under the skid.
NOTICE
Risk of improper storage. Can cause unit damage.
Keep unit upright and protected from contact damage.
Vertiv | Liebert® MC Installer/User Guide | 27

Table of Contents

Other manuals for Vertiv Liebert MCM080

Related product manuals