2 Pre-Installation
The air conditioner is engineered equipment and requires precise installation procedures for which the
preliminary preparation is very important. This chapter details the installation preparation, including how
to prepare the installation environment and space and reserve the maintenance space, the air conditioner
running and storage environment requirement, and how to unpack and inspect. Please read this chapter
carefully before installation.
WARNING! Only trained and qualified personnel must be allowed to install, maintain, and
operate the unit.
WARNING! The sharp edges, sharp angles of the object, and bare buckle can result in severe
injury. Only properly trained and qualified personnel wearing appropriate, OSHA-approved PPE
should attempt to move, lift, remove packaging from or prepare the unit for installation.
WARNING: Risk of unit falling over. Improper handling can cause equipment damage, injury or
death. Read all the guidelines pertaining to the system before unpacking, moving, lifting or
installing the components. Read the labels on the unit carefully to understand the safety
measures prior to handling the containment.
CAUTION: The center of gravity of the unit is inclined, therefore, when moving the unit adjust
the bearing position of the forklift or hand pallet truck.
To Next Page
Loading...
Need help?
General
