2.9 Weight Bearing Capacity
The unit will be installed inside the cabinet which will increase the cabinet concentrated floor loading.
Therefore, the weight bearing capacity of the floor of the room must be taken into consideration.
2.10 Inspection
• The unit is pre-charged. Check that there are no refrigerant or oil leaks.
• Check the system fittings and its components against the packing list to ensure that everything is in its
designated position and the entire product assembly is intact.
• Immediately report any missing or damaged parts or components to the carrier. If hidden damages
are observed, then contact the local service offices as soon as possible.
To Next Page
Loading...
Need help?
General
