to keep the vehicle still, leaving the motor running at idling speed. Using the motor to
keep the vehicle still can cause the clutch to overheat. This problem is due to the
friction of the clutch parts on the clutch bell. It is therefore recommended to avoid
conditions of prolonged clutch slippage leading to clutch overheating (for example, as
well as the situation described above, riding uphill fully laden on steep slopes or start-
ing off on slopes greater than 25%, etc.):
1. Do not continue riding in such conditions.
2. Let the clutch cool down with the motor at idling speed for a few minutes.
Safe driving
WARNING
SOME SIMPLE TIPS ARE PROVIDED BELOW WHICH WILL ENABLE YOU TO
USE YOUR VEHICLE ON A DAILY BASIS MORE EASILY AND SAFELY.
<
Your ability and your knowledge of the vehicle form the basis of safe riding. We rec-
ommend trying out the vehicle in traffic-free zones to get to know your vehicle
completely.
ALWAYS DRIVE WITHIN YOUR LIMITS
1. Before riding off, remember to put on your helmet and fasten it correctly.
2. Reduce speed and ride cautiously on uneven roads.
3. Remember that after riding on a long stretch of wet road without using the brakes,
the braking effect is initially lower. Under these conditions, it is a good idea to operate
the brakes from time to time.
25
To Next Page
Loading...
Need help?
General
