Vespa LX 50 User Manual

0.6 ÷ 0.7 mm
03_07
03_08
Removing the air filter (03_07, 03_08)
Remove the side fairing unscrewing the 2 screws marked A. Remove the air cleaner
cap «D» after having unscrewed the 5 fixing screws «C», then remove the filtering
element. Clean with water and shampoo, afterwards dry with compressed air and
submerge in a recommended oil and petrol mixture in ratio of 50%. Afterwards
squeeze it, leave it to dry and mount it again.
CAUTION
IN CASE OF RIDING ON DUSTY ROADS IT IS ADVISABLE TO CLEAN THE AIR
FILTER MORE FREQUENTLY THAN INDICATED IN THE RELEVANT CHAPTER
ON SCHEDULED MAINTENANCE.
Recommended products
AGIP FILTER OIL
Oil for air filter sponge
Mineral oil with specific additives for increased adhesiveness
31
3 Maintenance

Vespa LX 50 Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	49.9 cc
Fuel System	Carburetor
Front Brake	200 mm disc
Rear Brake	110 mm drum
Seat Height	785 mm
Fuel Tank Capacity	8.6 liters
Tires Front	110/70 - 11"
Tires Rear	120/70 - 10"
Length	1, 770 mm
Width	705 mm
Cooling System	Air cooled
Transmission	Automatic
Max Power	3.2 kW
Max Torque	4.2 Nm