Need help?Do you have a question about the Vetronix mts 3100 mastertech and is the answer not in the manual?
General| Brand | Vetronix |
|---|---|
| Model | mts 3100 mastertech |
| Category | Test Equipment |
| Language | English |
Guides on connecting and operating the Mastertech tester and its components.
Provides essential safety precautions for operating the Mastertech, particularly with engines running.
Introduces the Mastertech kit as a multi-tool for automotive diagnostics and its future expandability.
Describes the physical design and usability of the tester, including its hand-held capability and support stand.
Explains the role of plug-in program cards and cartridges for testing specific vehicles and systems.
Details the 27-key keypad layout and its role in menu selections and data input.
Describes the 3" x 3" display capabilities, including graphic and text modes, and contrast adjustment.
Details the DLC cable and adapters used to connect the tester to various vehicle data link connectors.
Covers the tester's power options, battery functions, and audio output device.
Explains the Instrumentation Port for connecting external devices and performing signal measurements.
Explains the use of diagnostic test leads for signal input to DVM and oscilloscope functions.
Describes the RS232 port for serial data communication with computers and printers.
Provides a summary of the Mastertech's physical and technical specifications.
Instructions for activating the NiCad and Lithium batteries by removing plastic strips.
Guides on inserting program cards and Tech 1 or I/O cartridges into the Mastertech.
Details the process of connecting the Mastertech to the vehicle using various cables and adapters.
Explains how to power the Mastertech using the vehicle battery, AC supply, or internal battery pack.
Explains the RS232 port for serial communication with peripheral devices like computers and printers.
Details the Instrumentation Port and diagnostic test leads for signal input and measurements.
Outlines the procedure for disconnecting cables, clearing codes, and powering off the tester.
Describes the NiCad battery pack, its purpose, and charging confirmations.
Details methods for recharging the NiCad battery pack, including time estimates.
Explains when and how to replace the NiCad batteries in the battery pack.
Provides instructions for replacing the 3-volt Lithium battery in the Mastertech.
Identifies likely causes and recommendations for a blank screen issue.
Explains common error messages and their potential causes and solutions.
Provides guidance on diagnosing and resolving power-up failures for the Mastertech.
Defines technical terms and abbreviations used throughout the manual.
To Next Page
