EasyManua.ls Logo

Vetus M2.06 - Coolant Level Checks

Vetus M2.06
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 cm
(
3
/
8
”)
COOLANT
COOLANT
42
6 Maintenance
Checking coolant level
Daily, before starting.
6 Checking coolant level
• Check the coolant level in the header tank.
This has to be checked when the engine is
cold.
• Remove the cap of the ller neck on the
heat exchanger.
7 Coolant level
The level of the coolant must be approx. 1 cm
(3/8”) below the lower edge of the ller neck.
8 Topping up coolant
• If necessary, top up.
The internal cooling system can be lled with
a mixture of anti-freeze (40 %) and tap water
(60 %) or with a special coolant. For specica-
tion, see page 109.
VD00158
VD01003
VD01004
Warning
Never open the cap on the header tank when
the engine is at operating temperature.
note
For a keel-cooled version, see page 19.
If a water heater is connected, see page 20
and 21
Caution
Never ll the cooling system with sea water or
brackish water.

Table of Contents

Related product manuals