Vetus M2.06 - Gearbox Oil Level and Change

54
25 Oil level check (ZF-Hurth)
6 Maintenance
Gearbox oil level check
Every 100 operating hours.
Vetus engines are normally equipped with
Technodrive or ZF-Hurth gearboxes. Consult
the supplied Owners Manual for more details
about care and maintenance. In case your
engine is equipped with another brand of
gearbox follow the instructions given in the
supplied owners manual for changing oil and
other care and maintenance.
24 Oil level check (Technodrive)
• Take the dipstick out of the gearbox hous-
ing by pulling or unscrewing.
• Check the oil level by lowering the dipstick
(cleaned) into the hole.
The oil level must between the two marks on
the dipstick
• If necessary top up by pouring oil into the
ller hole or the dipstick hole.
For oil type and specication see page 108.
17
VD01038 VD01032