Vetus M2.06 - Heat Exchanger Cleaning; Starter Motor and Alternator

70
6 Maintenance
Checking the starter motor and alternator
Every 1000 operating hours.
53 Checking the starter motor
• Check for visible defects.
• Check whether the Bendix engages with
the starter ring when the starter motor is
activated. If the Bendix does not engage
properly, contact your Vetus dealer.
54 Checking the alternator
• Check for visible defects.
• Remove the alternator belt. Turn the pulley
by hand to check whether the alternator
can be turned easily. If this is not the case,
contact your Vetus dealer.
VD01252 VD01251