VEVOR ALK-T2 - Editing Splice Programs

- 26 -
（2）Under the [ splice mode] menu select [ Edit splice
program].
Edit splice
program
Description
Pre-Splice time
Set the pre-discharge time from the
start of discharge to the propulsion of
the fiber
Pre-Arc current
Set the pre-discharge intensity from the
start of the discharge to the propulsion
of the fiber
Arc time
Set the discharge time during splicing
Arc current
Setting the current strength for splicing
Overlap length
Set the amount of overlap for fiber
propulsion during splicing
Splice
propulsion
speed
Setting the motor propulsion speed
during splicing
Arc- 2
Set whether to enable additional
discharge
Arc - 2-Time
Set the discharge time during splicing
Arc- 2-Current
Setting the current strength for splicing