This unit cannot be used with the following materials or any materials
containing them:
· Artificial leather containing hexavalent chromium (Cr[VI]) due to its
toxic fumes
·Astatine due to its toxic fumes
·Beryllium oxide, due to its toxic fumes
·Bromine, due to its toxic fumes
·Chlorine, including polyvinyl butyral (PVB) and polyvinyl chloride (PVC,
vinyl, Sintra, etc.), due to its toxic fumes
·Fluorine, including Teflon (Teflon, Teflon, etc.), due to its toxic fumes
·Iodine, due to its toxic fumes
·Metals, due to their electrical conductivity and reflectivity
·Phenolic resins, including various forms of epoxy resins, as they
produce toxic fumes
·Polycarbonate (PC, Lexan, etc.) due to its toxic fumes
Note:For all other materials, if you are unsure about the safety or
laserability of this device, look for its Material Safety Data
Sheet (MSDS). Particular attention is paid to information about
safety, toxicity, corrosivity, reflectivity, and reaction to high
temperatures. Alternatively, please contact our support department
for further guidance
To Next Page
Loading...
