34 OLP-87/OLP-87P
4 BASIC OPERATION
CHANGING SYSTEM SETTINGS
Setting the [Screen-Off] interval
When [Screen-Off] is set, the display will switch off after the
selected interval without any user action.
NOTE: [Screen-Off] is only active when no external power supply is
connected.
1. In the menu tap the [More] button,
then tap [Screen-Off].
2. Select the desired interval.
To switch on the display after it was switched off:
J Just tap the display to switch it on.
Selecting a language
1. In the menu tap the [More] button,
then tap [Language].
2. Tap the desired language.
After selecting a new language the instrument has to be
restarted.
3. Tap [Yes] to restart the instrument.
ā or ā
Tap [No] to keep the previous language.
Setting date & time
J In the menu tap the [More] button,
then tap [Date & Time].
To set the date:
1. Tap [Date].
2. Tap [Day], [Month], or [Year].
3. Type in the desired value.
4. Tap [OK].
To set the date format:
1. Tap [Date Format].
2. Select the desired date format.
To set the time:
1. Tap [Time].
2. Tap [Hour], [Minute], or [Second].
3. Type in the desired value.
4. Tap [OK].
To Next Page