122
Disposal
Disposal
When the machine reaches the end of its service life, it must be
disposed of in the correct way. Observe the following:
Metal parts
Deliver usable parts to an authorised recycling plant. The larger scrap
parts must be taken to an authorised breaker's yard where they can
be processed in accordance with current regulations.
Rubber parts
Take the usable parts to an authorised recycling plant where they can
be processed in accordance with current regulations.
Plastic
Take the usable parts to an authorised recycling plant where they can
be processed in accordance with current regulations.
Hydraulic oil
All oil must be emptied from the machine.
The oil that has been drained from the machine must be taken to a
breaker's yard where it can be processed in accordance with current
regulations.
Electronic parts
Take the usable parts to an authorised recycling plant where they can
be processed in accordance with current regulations.
To Next Page
Loading...
