Operation
57
Suspension
The springs contain a very large amount of stored energy
Always proceed with the utmost care and consideration when working
with the springs.
The springs are loaded with very large amounts of energy which can
be released very suddenly.
Failure to take due care may result in serious injuries or death.
Depending on the condition of the ground, it may be necessary to
adjust the setting of the springs.
Standard setting of the suspension Page 36
• If the springs are too taut, the cutting unit on the machine will be
unstable and jump when the machine is operating.
• If the springs are too slack, the cutting unit will drag heavily against
the ground when the machine is operating.
To Next Page
Loading...
