Vicon EXTRA 628 FT - Page 72

72
Maintenance
Maintenance
intervals
After 10 working hours Every day Every 40 hours of use Every 80 hours of use Every 200 hours of use or once a year Every month Every season As required Oil change Lubrication Check Replace Page
General check and service
Hydraulic hoses every 4 years •• 15
Universal joint - cutterbar • • 89
Cutting disc after 1 hour of use
• 83
Cutting disc • • 83
Cutting disc after 1 hour of use
• 82
Knives • • 82
••103
Cone • • 84
••86
Y-fingers • • 94
••109
Friction clutch • • 95
Friction disc
••110
Stone guards and counter knives • • 92
••107
Transmission
Main gear • • 101
••80
• • 101
Bevel gear
••102
• • 81
••102
Cutterbar • • 98
••78
• • 98
V-belt
Rotor ••97
• • 97
••111
Other
PTO shaft • • • 74
Rotor bearing
••75
spindle for the springs • • 76
Movable mechanical connections
••76