Vicon EXTRA 628 FT - Page 75

Maintenance
75
Every 40 hours
Cutting unit
> Press the nozzle on the grease gun over the grease nipple.
> Pump 1, max. 2 times with the grease gun.
 »Maintenance intervals« page 72
 »Lubricants« page 125
> Press the nozzle on the grease gun over the grease nipple.
> Pump 1, max. 2 times with the grease gun.
> Turn the cone 180.
> Press the nozzle on the grease gun over the grease nipple.
> Pump 1, max. 2 times with the grease gun.
 »Maintenance intervals« page 72
 »Lubricants« page 125
58.237.000
58.237.000
Cone