24
Preparation
Preparation
Preparing the
machine
For transporting the user the machine is divided into main
components. The machine is assembled according to the specific
assembly instructions delivered with each machine.
The following chapter is for initial assembling, reducing the length of
the P.T.O. shaft, etc. When assembling after, only certain attachment
points should be carried out.
Initial connection of the machine
Exercise caution when a new machine is connected for the first time.
Make sure that all safety instructions are complied with.
Following the safety instructions will increase your personal safety.
Failure to follow the safety instructions may result in serious injuries
and accidents.
PTO direction of
rotation
Standard direction of
rotation
The machine can be fitted to tractors with a PTO outlet rotating either
clockwise or anti-clockwise. The transmission has 2 output shafts as
shown.
The transmission is factory-fitted to tractors where the PTO outlet has
a clockwise direction of rotation.
Clockwise direction of rotation
Output shafts
To Next Page
Loading...
