Operation
47
Operation
Safety
Read the safety instructions before using the machine
Before using the machine, the operator should read the safety
instructions carefully.
»Safety« page 5
Attention to the safety instructions assures your and others personal
safety.
Failure to follow the instructions may result in serious injuries.
Work on the machine should only be carried out by persons who
have been thoroughly instructed
The machine should only be operated when the operator has been
given thorough instructions.
Thorough machine instruction allows safe usage.
Insufficient instructions can result in wrong usage of the machine and
accidents.
Do not remove the protection guards
Check that all protection guards are in place before use.
This assures that the machine will offer maximum protection to the
operator.
If the safety guards are removed or not used, it may result in serious
injuries and accidents.
Before operating
Make sure that the initial start of the machine is unhindered
Be aware of the area around the machine before start up.
Paying attention to the area around the machine will prevent injuring
persons or animals.
Insufficient attention to the area around the machine can result in
serious injuries.
Keep away from the machine
No unauthorised persons should be close to the machine during
operation.
This will ensure that no dangerous situations can arise.
Persons close to the machine during operation are at risk of being
severely injured.
Pay specific attention to children
Make sure the area around the machine is checked before start up.
Paying attention to the machine's surrounding area will prevent
injuring children.
Insufficient attention to the surrounding area can result in serious
injuries.
Following instructions should be complied with:
• Check all points mentioned in the section “maintenance”.
»Specific safety information« page 71
»Lubrication safety and use of oil« page 71
• Check knives are not worn down. The knives can be turned so they
rotate in the opposite direction.
»Knives« page 109
To Next Page
Loading...
