Safety
7
The meaning of the
symbols
Stop the tractor before working on the machine
Be attentive! The tractor engine must ALWAYS be stopped and the
ignition key removed before carrying out repairs, cleaning, lubricating
or maintaining the machine.
Read and observe the instruction manual
Be attentive! Read and understand the instruction manual before the
machine is put into service.
Ensure no clothing or body parts get caught in the PTO shaft
Guards may not be removed or opened, before the machine has
stopped rotating. The tractor engine must be stopped, the ignition key
removed and the handbrake applied.
Risk of thrown up pebbles
Keep a safe distance from the machine. Persons may not stand near
the machine when it is working. If the guard is damaged, it must be
replaced.
Use the correct support for the machine
Your body could become caught!
Never work under the machine without using the correct support. The
tractor engine must be stopped, the ignition key removed and the
handbrake applied.
Ensure no body parts get caught in the machine
No work may be carried out on the machine's rotors or cutterbar until
the machine has stopped rotating. The tractor engine must be
stopped, the ignition key removed and the handbrake applied.
Danger: rotating machine parts
Children must never be allowed near the machine. Only the operator
is allowed near the machine.
To Next Page
Loading...
