Vicon EXTRA 632 FR - Page 77

Maintenance
77
Every 40 hours
Cutting unit
> Press the nozzle on the grease gun over the grease nipples.
> Pump 1, max. 2 times with the grease gun.
 »Maintenance intervals« page 73
 »Lubricants« page 128
> Press the nozzle on the grease gun over the grease nipple.
> Pump 1, max. 2 times with the grease gun.
> Turn the cone 180.
> Press the nozzle on the grease gun over the grease nipple.
> Pump 1, max. 2 times with the grease gun.
 »Maintenance intervals« page 73
 »Lubricants« page 128
58.237.000
58.237.000
Cone