Maintenance
166
Fit the cover.
Fit the bolts.
Accumulator
Very high amount of accumulated pressure in the accumulator
Do not attempt to replace the accumulator.
The accumulator contains very high accumulated pressure and may
only be taken apart by authorised persons.
Attempting to replace the accumulator can lead to serious or fatal
injury.
As required
The machine is fitted with an accumulator that can absorb excess
shock from the cutting unit when the machine is in its transport
position.
Pressure in the accumulator: 145 bar (2105 psi).
The accumulator may only be replaced by authorised service
personnel.
To Next Page
Loading...
