Disposal
174
Disposal
When the machine reaches the end of its service life, it must be
disposed of in the correct way. Observe the following:
Metal parts
Take usable parts to an authorised recycling plant. Larger scrap parts
must be taken to an authorised breaker's yard where they can be
processed in accordance with current regulations.
Rubber parts
Take usable parts to an authorised recycling plant where they can be
processed in accordance with current regulations.
Plastic
Take usable parts to an authorised recycling plant where they can be
processed in accordance with current regulations.
Hydraulic oil
All oil must be drained from the machine.
Used oil must be taken to a breaker's yard where it can be processed
in accordance with current regulations.
Electronic parts
Take usable parts to an authorised recycling plant where they can be
processed in accordance with current regulations.
To Next Page
Loading...
