Operation
54
Operation
Safety
The operator should receive careful instructions before using the
machine
The machine should only be used if the operator has been given
thorough instructions.
Thorough machine instruction allows safe usage.
Insufficient training may lead to incorrect usage of the machine and
accidents.
The side guard for the cutting unit must be correctly positioned
before start up
The side guard for the cutting unit must be folded out and correctly
positioned before the machine is started.
This ensures that the machine will give maximum protection to the
operator.
Moving objects may cause serious injuries and accidents.
The machine is operated in the following way:
Make sure that there are no persons in the surrounding area.
Make sure all the guards on the machine are secure.
Check that the side guard on the cutting unit is folded out and
correctly positioned.
Position the tractor and the machine in a straight line.
To Next Page
Loading...
