Operation
55
Check that the mechanical safety valve is open.
Carefully connect the tractor's PTO shaft.
Carefully increase the speed of the PTO shaft to 540/1000 rpm.
»Number of revolutions on the PTO outlet« Page 30
Use the tractor's machine handle to operate the hydraulic
functions.
If none of the machine's functions are working:
Stop the tractor’s forward drive.
Stop the tractor.
Disconnect the PTO shaft immediately.
If the machine is too noisy or vibrates too much, stop the machine
immediately.
»Troubleshooting« page 171.
To Next Page
Loading...
