Operation
64
The recommended distance between the rollers is 3 mm (
1
/
8
’’).
The distance between the rollers is checked in the following way:
It is recommended that the check be carried out by two people.
Place a 3 mm (
1
/
8
’’) spacer in between the rollers approx. 50 mm
(2’’) from the outermost end of the roller on both the left and right-
hand sides.
Turn the rollers a little so that the spacers are placed in between
the rollers.
check that the rollers are correctly positioned pressed against the
spacers.
• If there is too much distance between the rollers:
»Reducing the distance between the rollers« Page 63
• If there is too little distance between the rollers:
»Increasing the distance between the rollers« Page 65
Tighten the counter nuts.
To Next Page
Loading...
